Environmental sustainable analytical methods were developed by mathematical modification of UV absorption spectra for quality control study of multicomponent formulations consisting of remogliflozin (REM) and teneligliptin (TEN), with good sensitivity and selectivity. Then analytes were quantified by measuring the peak amplitude of the first derivative spectra at zero crossing points at 230.2 nm and 213.8 nm for REG and TEN in the first derivative method. The second method involves the formation of ratio spectra and taking the absorption difference at two selected wavelengths of peak and trough of a spectrum. In the ratio first derivative method peak amplitudes were measured at 235.2 nm and 259.1 nm for simultaneous quantification of REM and TEN respectively. The fourth method was based on the measurement of the peak amplitude of zero-order spectra of analytes generated from the mixture spectrum by subtraction of a constant from the ratio spectrum followed by multiplication with divisor spectrum, Further, the proposed methods were validated systematically to confirm the linearity, precession, accuracy, sensitivity, and selectivity. Finally, validated UV spectroscopic methods were applied for simultaneous quantification of REM and TEN from formulation, and laboratory mixed solutions and statistically compared with the reported HPLC method. Further, recently developed AGREE, Hexagonal greenness and white analytical chemistry, a whiteness evaluation tools were applied to the proposed UV spectroscopic methods and found to be safer analytical methods, compared to the reported expensive, time-consuming and toxic HPLC method. Hence, proposed UV spectroscopic methods could be used for routine quality control of formulations containing REM and TEN.
Keywords: Eco-friendly; HPLC; Multicomponent; UV derivative spectroscopy; White analytical chemistry.
Copyright © 2022 Elsevier B.V. All rights reserved.