Metakaolin was used as a raw material for the preparation of geopolymers, where two types of alkali activators (Na2SiO3 + NaOH and Na2SiO3 + NaOH) were used to prepare metakaolin geopolymers at room temperature. The mechanical properties and microstructures of the metakaolin geopolymers were analyzed. A three-factor, four-level orthogonal test was designed to investigate the mechanical properties of the metakaolin geopolymer with different ratios. The compressive and flexural strength of different specimens were tested for 7 and 28 days. Both the Na-based and K-based geopolymers exhibited excellent mechanical properties, but the K-based geopolymer had better mechanical properties. The optimal compressive strength and flexural strength of the K-based geopolymer were 73.93 MPa and 9.37 MPa, respectively. The 28-day optimal compressive strength of the Na-based polymer was 65.79 MPa, and the flexural strength was 8.71 MPa. SEM, XRD, and FTIR analyses showed that the mechanical properties of the geopolymers could be greatly improved by using a higher alkaline solution concentration, proper Na2SiO3/MOH mass ratio, and proper mass ratio of alkali exciter to metakaolin. Amorphous silicoaluminate was more favorable for the dissolution of silicon-alumina raw materials, promoted the formation of an amorphous silicoaluminate gel, and caused the internal structure of the geopolymer to be more compact.
Keywords: geopolymer; mechanical properties; metakaolin; microstructure analysis.