A study on pick cutting properties with full-scale rotary cutting experiments and numerical simulations

PLoS One. 2022 Apr 14;17(4):e0266872. doi: 10.1371/journal.pone.0266872. eCollection 2022.

Abstract

To investigate the cutting forces on road-header picks, a series of full-scale single-pick rotary cutting tests on sandstone samples were conducted at the National Engineering Laboratory of Coal Mining Machinery and Equipment, China. The primary objective of this study is to optimize the cut spacing and to verify the numerical simulation results. Cutting forces are investigated under different cutting depths and cut spacings. Cut spacing is optimized by analyzing the specific energy, coarseness index, and cutting force. The rock cutting process is simulated on a pick model using the PFC3D software. Rock samples are used as models, and particle assemblies and micro-properties are calibrated by uniaxial compressive strength tests and Brazilian disc tensile strength tests. The optimum ratio of cut spacing to cutting depth for the analyzed sandstone is determined to be in the range of 3 to 4. The experimental results show that a higher coarseness index corresponds to an increased block ratio, and specific energy decreases under optimum cutting conditions. Forces acting on the pick model are determined by simulation. A reasonable agreement exists between the experimental and numerical simulation results regarding the pick forces. The influence of the cut spacing on the rock-breaking effect observed in the experiments is confirmed by numerical simulations. Therefore, numerical simulations using the PFC3D software represent a reliable method for predicting the pick forces.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Compressive Strength
  • Computer Simulation
  • Engineering*
  • Mechanical Phenomena*
  • Tensile Strength

Grants and funding

This work was supported in part by the Shanxi Provincial Natural Science Foundation of China (No. 201901D211120), the funder is Qiuxia Fan, whose role in this study is data collection and analysis; In part by the Scientific Research Project of Returnees Studying Abroad in Shanxi Province (No. 2020-007), the funder is Qiuxia Fan, whose role in this study is data collection and analysis; In part by the National Natural Science Foundation of China (61903240), the funder is Fujing Xu, whose role in this study is preparation of the manuscript.