The steering gear device includes two parts, a steering gear control circuit and a transmission component. The transmission component includes a ball screw and a motor. During the operation of the steering gear, due to the presence of the steering gear ball screw motor and friction, a certain amount of heat will be generated, which will affect the steering gear control circuit in a confined space. At the same time, the steering gear is inevitable in the actual working process, and will experience a high temperature environment, which will increase the temperature of the internal structure of the steering gear, and due to the difference in thermal expansion coefficients between various materials, stress and strain will occur in the structure, which may cause mismatch or even cracks in the system structure, and the steering gear system cannot work normally. It is necessary to analyze the thermal characteristics of the overall steering gear under multiple factors. Based on this, this paper uses COMSOL three-dimensional simulation software to conduct thermal simulation analysis on the shell of the steering gear containing the control circuit board. The temperature distribution and stress-strain response law of the control circuit board in the box, and the influence of different materials and thickness of the box heat insulation layer on the thermal characteristics of the control circuit are discussed, and then a reasonable thickness and material of the heat insulation layer are obtained for the design of the rudder chassis for reference.
Copyright © 2022 Wen Huo.