TiSiCN coatings have been obtained by anode evaporation of titanium and the decomposition of hexamethyldisilazane in an arc discharge, using a self-heated hollow cathode, at the pressure rate of 1 mTorr of the Ar+N2 gas mixture. The proposed method makes it possible to independently and widely change the amount of metal and precursor vapor flows, the pressure and composition of the vapor-gas mixture and the degree of ionic interaction on the surface of the growing coating within a single discharge system. The paper presents the method and the results of the effect of a current discharge (10-50 A), and the flux of precursor vapours (0-1 g/h), on deposition rates, compositions, and properties of TiSiCN coatings deposited by an advanced combined PVD+PECVD method. Dense homogeneous TiSiCN coatings up to 6 µm thick and up to 27.5 GPa in hardness were obtained at 7.5 µm/h. The composition of the obtained coatings has been studied by X-ray diffraction and X-ray photoelectron spectroscopy, and it has been shown that the presented methods can form nanocomposite coatings with nanocrystallites TiC, TiN, and TiCxN1-x 3-10 nm in the amorphous matrix based on SiCN.
Keywords: PECVD; PVD; TiSiCN; anodic evaporation; hollow cathode arc; nanocomposite coatings.