The influence of temperature environmental on performance of HNIW/FOX-7 based PBXs

Mengnan Zhou; Shusen Chen; Hui Chao; Na Wang; Bo Yan; Guanchao Lan; Shaohua Jin

doi:10.1038/s41598-022-08752-6

The influence of temperature environmental on performance of HNIW/FOX-7 based PBXs

Sci Rep. 2022 Mar 23;12(1):4988. doi: 10.1038/s41598-022-08752-6.

Authors

Mengnan Zhou¹, Shusen Chen¹, Hui Chao², Na Wang², Bo Yan², Guanchao Lan², Shaohua Jin³

Affiliations

¹ School of Materials Science and Engineering, Beijing Institute of Technology, Beijing, 100081, China.
² Research Institute, Gansu Yin Guang Chemical Industry Group Co. Ltd, Baiyin, 730900, China.
³ School of Materials Science and Engineering, Beijing Institute of Technology, Beijing, 100081, China. jinshaohua@bit.edu.cn.

Abstract

During application, energetic materials may suffer different temperature environmental stimulation. In order to study the influence of temperature environmental on performance of HNIW/FOX-7 based PBXs, HNIW/FOX-7 based PBX modeling powders and PBX columns were treated by LT (low temperature), HT (high temperature), HLC (high-low temperature cycle) and HLS (high-low temperature shock). Then scanning electron microscope (SEM), infrared spectra (IR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC) were used to study the variation of PBX modeling powders after LT, HT, HLC and HLS treatments; in addition, the mass, size and mechanical properties of PBX columns were characterized after different temperature adaptability treatments as well. The results indicate that the change ratios of mass and size of HNIW/FOX-7 based PBX columns are less than 1%, illustrating that mass and size of PBX columns are at acceptable level after different temperature adaptability treatments. The unevenness degree of the surface of PBX modeling powders followed the order of HLC > HT > LT > HLS, which agrees well with mass loss order. Moreover, IR and XRD results indicated that the molecular structure and crystal form of HNIW and FOX-7 did not change after different temperature adaptability treatments. Additionally, thermal stabilities of PBX modeling powders are decreased after different temperature adaptability treatments, among which HLS has the largest influence on HNIW/FOX-based PBX modeling powders. The compression strengths and elastic moduli of HNIW/FOX-based PBX columns are enhanced after different temperature adaptability treatments, among which the strength of PBX columns after HLC has the maximum increase, indicating that HLC has more significant effect on mechanical property.