Electronic skin (E-skin) is a crucial seamless human-machine interface (HMI), holding promise in healthcare monitoring and personal electronics. Liquid metal (LM) has been recognized as an ideal electrode material to fabricate E-skins. However, conventional sealed LM electrodes cannot expose the LM layer for direct contact with the skin resulting in the low performance of electrophysiological monitoring. Furthermore, traditional printed LM electrodes are difficult to transfer or recycle, and fractures easily occur under stretching of the substrate. Here, we report a kind of LM electrode that we call a kirigami-structured LM paper (KLP), which is self-supporting, conductor-exposing, stretchable, ultrathin, and recyclable for multifunctional E-skin. The KLP is fabricated by the kirigami paper cutting art with three types of structures including uniaxial, biaxial, and square spiral. The KLP can act as an E-skin to acquire high-quality electrophysiological signals, such as electroencephalogram (EEG), electrocardiogram (ECG), and electromyogram (EMG). Upon integration with a triboelectric nanogenerator (TENG), the KLP can also operate as a self-powered E-skin. On the basis of the self-powered E-skin, we further developed a smart dialing communication system, which is applied on human skin to call a cellphone. Compared with conventional sealed or printed LM electrodes, the KLP can simultaneously achieve self-supporting, conductor-exposing, stretchable, ultrathin, and recyclable features. Such KLP offers potential for E-skins in healthcare monitoring and intelligent control, as well as smart robots, virtual reality, on-skin personal electronics, etc.
Keywords: electronic skin; electrophysiological monitoring; kirigami; liquid metal electrode; self-powered.