As part of the engineering of bone grafts, wrapping constructs in well-vascularized tissue, such as fascial flaps, improves bone formation. Our aim was to understand the cross-sectional vascularization pattern of human adipofascial flaps for this application.
Methods: Seven adipofascial anterolateral thigh (ALT) flaps were harvested from five human cadaveric specimens. Axial vessel density was analyzed by immunohistochemistry and quantitative histology.
Results: We found a high density of blood vessels directly superficial to and close to the fascia. A secondary plexus in between this first suprafascial plexus and the subdermal plexus was also identified. In all specimens, this second plexus showed less vascular density, and appeared to be at a constant level within the suprafascial fat throughout the flaps. The peak measurements for this secondary plexus varied between 1.2 and 2 mm above the deep fascia, depending on the donor's body mass index.
Conclusions: Quantitative immunohistochemistry is a reliable method to quantify and locate vessel density in an adipofascial flap. This is vital information before wrapping nonvascularized material into such a flap to estimate the inosculation potential of these vessels and likelihood of survival of the tissue. To profit from both suprafascial vascular plexuses, a correlation between subcutaneous tissue thickness and distance of the second plexus to the fascia should be further investigated. For the moment, we recommend maintaining at least 2-3 mm of subcutaneous fatty tissue on the fascia, to profit from both plexuses. Engineered constructs should be wrapped on the superficial medial side of the fascial flap to enhance vascularization.
Copyright © 2022 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of The American Society of Plastic Surgeons.