Examination of thermoforming techniques to secure mouthguard thickness of the labial and buccal sides with a single sheet: An in vitro study

Abstract

Background/aim: Mouthguards must have an appropriate thickness to prevent oral trauma during sports. The aim of this study was to establish a thermoforming technique to secure the labial and buccal thicknesses of the mouthguard with a single sheet.

Materials and methods: Mouthguards were thermoformed using 4.0-mm thick sheets manufactured by extrusion molding, a plaster model, and a vacuum forming machine. Two sheet installation conditions were compared: the sheet extrusion direction was either parallel (P) or vertical (V) to the model's centerline. In each extrusion direction, two forming conditions were compared: (1) the sheet was formed when it sagged 15-mm below the sheet frame at the top of the post (control group; C-P, C-V); and (2) the sheet frame was lowered 50-mm below the ordinary level and heated, the frame was lowered when it sagged 15-mm, and the model was moved forward 20-mm before formation (experimental group; E-P, E-V). Difference in thickness (incisal edge, labial surface, cusp, and buccal surface) due to sheet extrusion direction and forming conditions were analyzed by two-way ANOVA and the Bonferroni method.

Results: At all measurement sites, a significant difference in thickness depending on the sheet extrusion direction was observed in the experimental group (p < .01), but not in the control group. Difference in thickness depending on the forming condition was observed at all measurement sites, and the thickness was in the order C-P, C-V < E-P < E-V. Thicknesses of E-P and E-V were 3.01 ± 0.03 mm and 3.25 ± 0.02 mm on the labial surface, and 2.81 ± 0.02 mm and 3.02 ± 0.02 mm on the buccal surface.

Conclusions: It was possible to obtain 3 mm or more thickness on the labial and buccal sides with a single sheet by adjusting the sheet extrusion direction and the heating method of the sheet, and by applying the thermoforming method where the model is moved forward just before formation.

Keywords: dental trauma; mouthguard; prevention.