Investigation on Inorganic Salts K2TiF6 and KBF4 to Develop Nanoparticles Based TiB2 Reinforcement Aluminium Composites

Vinayagam Mohanavel; K Ravi Kumar; T Sathish; Palanivel Velmurugan; Alagar Karthick; M Ravichandran; Saleh Alfarraj; Hesham S Almoallim; Shanmugam Sureshkumar; J Isaac JoshuaRamesh Lalvani

doi:10.1155/2022/8559402

Investigation on Inorganic Salts K2TiF6 and KBF4 to Develop Nanoparticles Based TiB2 Reinforcement Aluminium Composites

Bioinorg Chem Appl. 2022 Jan 30:2022:8559402. doi: 10.1155/2022/8559402. eCollection 2022.

Affiliations

¹ Centre for Materials Engineering and Regenerative Medicine, Bharath Institute of Higher Education and Research, Selaiyur, Chennai 600073, Tamil Nadu, India.
² Department of Mechanical Engineering, KPR Institute of Engineering and Technology, Coimbatore-641407, Tamilnadu, India.
³ Department of Mechanical Engineering, Saveetha School of Engineering, SIMATS, Chennai 602 105, Tamil Nadu, India.
⁴ Department of Electrical and Electronics Engineering, KPR Institute of Engineering and Technology, Coimbatore 641407, Tamil Nadu, India.
⁵ Department of Mechanical Engineering, K. Ramakrishnan College of Engineering, Tiruchirappalli-621112, Tamilnadu, India.
⁶ Zoology Department, College of Science, King Saud University, Riyadh 11451, Saudi Arabia.
⁷ Department of Oral and Maxillofacial Surgery, College of Dentistry, King Saud University, PO Box-60169, Riyadh-11545, Saudi Arabia.
⁸ Department of Animal Resources Science, Dankook University, 119,Dandae-ro, Cheonan,31116, Republic of Korea.
⁹ Department of Mechanical Engineering, Faculty of Mechanical and Production Engineering, AMIT, Arbaminch University, Ethiopia.

Abstract

In the current research, AA6082 aluminium alloy matrix composites (AAMCs) incorporated with various weight fractions of titanium diboride (0, 3, 6, and 9 wt%) were prepared via an in situ casting technique. The exothermic reaction between inorganic powders like dipotassium hexafluorotitanate (K2TiF6) and potassium tetrafluoroborate (KBF4) in molten Al metal contributes to the development of titanium diboride content. The manufactured AA6082-TiB2 AAMCs were evaluated using a scanning electron microscope (SEM) and X-ray diffraction (XRD). The mechanical properties and wear rate (WR) of the AAMCs were investigated. XRD guarantees the creation of TiB2 phases and proves the nonappearance of reaction products in the AMCs. SEM studies depict the even dispersion of TiB2 in the matrix alloy. The mechanical and tribological properties (MTP) of the AAMCs showed improvement by the dispersion of TiB2 particles. The WR decreases steadily with TiB2 and the least WR is seen at nine weight concentrations of TiB2/AA6082 AAMCs. Fabricated composites revealed 47.9% higher flexural strength and 14.2% superior compression strength than the base AA6082 alloy.

Publication types

Retracted Publication