Thermodynamic Characteristics of the Hydrogen Sulfide Sorption Process by Ferromanganese Materials

Olga V Cheremisina; Maria A Ponomareva; Victor A Bolotov; Artyom S Osipov; Alexandr V Sitko

doi:10.1021/acsomega.1c06037

Thermodynamic Characteristics of the Hydrogen Sulfide Sorption Process by Ferromanganese Materials

ACS Omega. 2022 Jan 11;7(3):3007-3015. doi: 10.1021/acsomega.1c06037. eCollection 2022 Jan 25.

Authors

Olga V Cheremisina¹, Maria A Ponomareva¹, Victor A Bolotov¹, Artyom S Osipov¹, Alexandr V Sitko¹

Affiliation

¹ Saint Petersburg Mining University, 2, 21st Line, St Petersburg 199106, Russia.

Abstract

The work analyzes hydrogen sulfide sorption from model gas mixtures containing H₂S from 1.25 × 10^-3 to 1.28 × 10^-4 mol/L under static conditions at temperatures 253 and 298 K on the raw manganese ore of the Ulu-Telyak deposit (Bashkortostan, Russia), manganese(IV) oxide, and manganese(IV) and iron(III) oxide mixtures. The thermodynamic models for calculating the equilibrium constants and Gibbs energy changes were analyzed. The sorption isotherms were described by the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. The value of enthalpy of hydrogen sorption on the ore was -68.98 ± 3.45 kJ/mol and those on model mixtures Mn₄ + Fe₂O₃ and MnO₄ were ±12.20 kJ/mol and -103.826 ± 5.19 kJ/mol, respectively, and the entropies of the hydrogen sulfide sorption process on three manganese materials at 253 K were calculated. The limiting capacity values of manganese materials at 253 and 298 K were obtained. The morphological analysis of the ore samples, Mn₄ + Fe₂O₃, and MnO₄, before and after hydrogen sulfide sorption, was carried out at 253 K. The obtained thermodynamic parameters determine the advantage of using the raw manganese ore over pure oxides, which characterizes its effective practical application in the desulfurization process.