We herein report the synthesis of monoclinic calcium aluminate (CaAl2O4) nanoparticles via a facile auto-combustion method followed by calcination. We performed the auto-combustion method using aluminium nitrate and calcium nitrate as oxidants and different fuels as reductants such as urea, glycine, and a mixture of urea and glycine, with various fuel-to-oxidant equivalence ratios . Then, the combusted samples were calcined at different temperatures; 600 and 800 °C. The products were characterized by means of X-ray diffraction, Fourier transform infrared spectroscopy, thermo-gravimetric analysis, field-emission scanning electron microscope, and high-resolution transmission electron microscope. CaAl2O4 nanoparticles with an average crystallite size of 40.4, 38.8, and 33.7 nm were obtained after calcination at 800 °C using the aforementioned fuels, respectively. TEM images revealed that CaAl2O4 nanoparticles tend to form partially sintered aggregates owing to the high thermal treatment temperature, so they have non-uniform shapes. The produced CaAl2O4 nanoparticles exhibited good absorptivity toward Ni(II) and As(III) ions form aqueous media. The maximum sorption capacities (qm) of CaAl2O4 for the removal of Ni(II) and As(III) were found to be 58.73 and 43.9 mg.g-1, at pH 7 and 5, respectively. The equilibrium isotherms and adsorption kinetics studies revealed that the adsorption data fitted well Freundlich isotherm and pseudo-second-order models, respectively. Besides, the adsorption of Ni(II) and As(III) ions on CaAl2O4 nanoparticles is physisorption. Overall, the obtained results indicated that calcium aluminate nano-adsorbent is a good candidate for the removal of Ni(II) and As(III) ions from wastewater, due to its high efficiency, stability, and re-usability.
Keywords: Auto-combustion; Ni(II) and As(III) ions; adsorption; monoclinic CaAl2O4 nanoparticles; wastewater.