Background: The objective of this study was to clarify whether anteroposterior dimension of the radius along the screw axis of a fixed angle volar locking plate (VLP) can be predicted from the width of the radius on the VLP. Methods: Sixty-nine wrists in 68 patients with distal radius fractures that underwent fixation with a fixed angle VLPs were evaluated. All patients underwent pre- and postoperative computed tomographic scans of the distal radius. The transverse width of the radius was measured at the position of the third screw hole from the proximal edge. The anteroposterior dimension of the radius (R) was measured along the axes of the distal screws. The distal row screw holes were defined as R1, R2, R3, and R4 from the radial to the ulnar side. Correlation analysis between the width and the anteroposterior dimension, and single regression analysis were performed for each screw hole. The correlations amongst the R values for the different distal row screws were also assessed. Results: The correlation coefficients between the transverse width and anteroposterior dimensions were 0.54, 0.58, 0.55, and 0.42 for R1, R2, R3, and R4 respectively (p < 0.05). The regression equations were R1 = 0.49W + 7.99, R2 = 0.47W + 11.8, R3 = 0.52W + 10.8, and R4 = 0.41W + 11.5 respectively. The correlation coefficients among anteroposterior dimensions were 0.85, 0.64, 0.59, 0.70, 0.61, and 0.80 for R1/R2, R1/R3, R1/R4, R2/R3, R2/R4, and R3/R4 respectively (p < 0.01). Conclusions: There were significant correlations in the anteroposterior dimensions amongst the distal row screw lengths. The regression equations used in this study may be helpful to predict the length of distal row screw and prevent complications due to inappropriate screw choices. Level of Evidence: Level III (Therapeutic).
Keywords: Computed tomography; Distal radius fracture; Osteosynthesis; Preoperative plan; Volar locking plate.