Mechanical and Water Absorption Properties of Short Banana Fiber/Unsaturated Polyester/Molecular Sieves + ZnO Nanorod Hybrid Nanobiocomposites

Chinnappa Arumugam; Gandarvakottai Senthilkumar Arumugam; Ashok Ganesan; Sarojadevi Muthusamy

doi:10.1021/acsomega.1c02662

Mechanical and Water Absorption Properties of Short Banana Fiber/Unsaturated Polyester/Molecular Sieves + ZnO Nanorod Hybrid Nanobiocomposites

ACS Omega. 2021 Dec 14;6(51):35256-35271. doi: 10.1021/acsomega.1c02662. eCollection 2021 Dec 28.

Authors

Chinnappa Arumugam¹, Gandarvakottai Senthilkumar Arumugam², Ashok Ganesan³, Sarojadevi Muthusamy¹

Affiliations

¹ Department of Chemistry, Anna University, Chennai 600025, India.
² National Center for Flexible Electronics, IIT Kanpur, Kanpur 208016, India.
³ Metabolic Engineering Group, ICGEB, New Delhi 110067, India.

Abstract

ZnO nanorods were prepared by the sol-gel method and characterized using UV-visible absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetric analysis/differential thermogravimetry (TGA/DTG), high-resolution transmission electron microscopy (HR-TEM), field emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDAX). Banana fiber/polyester resin (BF/PE) biocomposites and BF/PE/MS/nano ZnO nanobiocomposites were made using the untreated and chemically treated (with NaOH, formic acid, acetic anhydride, hydrogen peroxide, and potassium permanganate) banana fiber (BF), unsaturated polyester resin (PE), molecular sieves (MS), and the prepared ZnO nanorods. The KMnO₄, Ac₂O, and NaOH treatments enhanced the thermal stability of the nanobiocomposites. Addition of 2% of ZnO nanorods increased the tensile strength of all of the chemically treated BF/PE/MS biocomposites. The chemical treatments alone decreased (NaOH-15.4 MPa; KMnO₄-14.5 MPa; H₂O₂-9.9 MPa; Ac₂O-7.9 MPa; HCOOH-6.9 MPa) the compressive strength of the untreated BF/PE/MS biocomposite (25.9 MPa). But the chemical treatment and addition of ZnO nanorods enhanced the compressive strength effectively (48.5, 41.6, 39.4, 37.0, and 34.6 MPa for NaOH, HCOOH, KMnO₄, H₂O₂, and Ac₂O treatments, respectively) compared to the untreated BF/PE/MS biocomposites (24.0 MPa). The H₂O₂ (69.0 MPa) and NaOH (62.9 MPa) treatments enhanced the flexural strength of the untreated BF/PE biocomposites (51.6 MPa). The addition of ZnO nanorods enhanced the flexural strength of all of the chemically treated (except NaOH) BF/PE/MS biocomposites (55.7, 59.4, 79.0, and 67.4 MPa for HCOOH, Ac₂O, H₂O₂, and KMnO₄ treatments, respectively). The impact strengths of the biocomposites were enhanced by both chemical treatments and addition of ZnO nanorods. The addition of ZnO nanorods decreased the water absorption of the biocomposites significantly from 24.3% for the untreated to a minimum of 14.5% for the H₂O₂-treated BF/PE/MS/ZnO nanobiocomposite.