Background: Chitosan-based hydrogels have been prepared previously by a two-step protocol in which chitosan was first dissolved in dilute acetic acid and then crosslinked by glutaraldehyde or genipin. This was a time-consuming method, which had the disadvantages of high costs and biological safety problems.
Results: Scanning electron microscopy (SEM) results verified the successful preparation of hydrogels based on high, medium, and low molecular-weight chitosan (HCS, MCS, and LCS), respectively. The hydrogels prepared with HCS, MCS, and LCS were formed through the accumulation of different-sized crystals. The framework density of the hydrogel was enhanced by an increase in the chitosan molecular weight and exhibited a crack pore pattern composed of flake particles. Medium molecular-weight chitosan-based hydrogel exhibited the highest specific surface area and total pore volume, with values of 3.81 m2 g-1 and 0.0109 cm3 g-1 , respectively. The water absorption rate of the chitosan based hydrogels was influenced by its molecular weights at the sequence of LCS > HCS > MCS, while the maximum compression stress was affected at the sequence of HCS > MCS > LCS. The network structure was enhanced with an increase in the chitosan molecular weight and reached maximum stress levels of 4.50, 1.50 and 0.75 MPa for HCS-, MCS-, and LCS-based hydrogels, respectively.
Conclusion: Citric acid was shown to be an effective dissolving and crosslinking agent in the preparation of MCS- and HCS-based hydrogels. The physiochemical properties of the hydrogels were enhanced as the molecular weight of the chitosan increased. © 2021 Society of Chemical Industry.
Keywords: chitosan; citric acid; different molecular weights; hydrogel; physiochemical properties.
© 2021 Society of Chemical Industry.