Production of concrete is connected to extensive energy demands, greenhouse gases production or primary sources depletion. Reflecting current economical, social, or environmental trends, there is strong pressure on mitigation these requirements and impacts. The exploitation of secondary- or waste materials in production processes has therefore a great potential which is not related solely to binders but also to fillers. In this light, this paper aims at thorough investigations of concrete mixtures with crushed concrete pavements as partial or full replacement of natural coarse aggregates. The research combines experimental techniques to quantify the influence of the substitution on basic physical, mechanical, and heat/moisture transport/storage parameters. The experimental data obtained are further exploited as input data for computational prediction of coupled heat and moisture transport to assess the influence of the aggregates substitution on hygrothermal performance of the built-in concretes. In the last step, the environmental impacts are assessed. Since the changes in the hygrothermal performance were found to be insignificant (i), the compressive strength were improved by up to 25% (ii) and most of the environmental impact indicators were decreased (iii) at the same time, the findings of the research presented predeterminate such a reuse strategy to wider application and use.
Keywords: computational modelling; environmental impacts; experimental analysis; hygrothermal performance; material properties; recycled concrete aggregates.