Oceans play a key role in the global mercury (Hg) cycle, but studies on Hg isotopes in seawater are rare due to the extremely low Hg concentration and the lack of a good preconcentration method. Here, we introduce a new coprecipitation method for separating and preconcentrating Hg from seawater for accurate isotope measurement. The coprecipitation was achieved by sequential addition of 0.5 mL of 0.5 M CuSO4, 1 mL of 0.5 M Na2S, and 1 mL of 0.5 M CuSO4 reagents, which allowed for quantitatively precipitating Hg from up to 10 L of seawater. The protocol was validated by testing synthetic solutions with varying Hg and iodide (I-) concentrations and by comparing the reaction times of various reagents added. The method resulted in a quantitative recovery of 98 ± 12% (n = 32, two standard deviations, 2 SD) and a relatively low procedure blank (103 pg of Hg, n = 8). The precipitates were filtrated and analyzed for Hg isotopes. Repeated measurements of synthetic seawaters spiked with certificated standard materials (NIST 3133 and 3177) using the entire method gave identical Hg isotope ratios with near-quantitative Hg recovery, indicating no isotope fractionation during preconcentration. A total of six nearshore seawater samples from the Yellow Sea and the Bohai Sea (China) were analyzed using the coprecipitation method. The data showed a large fractionation of Hg isotopes and revealed the possible impact of both atmospheric and anthropogenic inputs to the coastal seawater Hg budget, implying the potential application of this method in studying marine Hg systematics and global Hg cycling.