Separation of microalgae using a compacted magnetite-containing gel bed

Abstract

Separation of microalgae of various sizes and shapes is an important process that enables subsequent production of useful compounds. Herein, the separation of microalgae was accomplished using a magnetite-containing gel (42 μm) packed into a column. An algal suspension was injected into the top of the gel bed, after which water was passed through the column. The pressure generated during the process caused the lower domain of the gel bed to deform, resulting in narrowed gaps between the gel beads. When a suspension of Nannochloropsis sp. (0.0069-0.69 g L^-1) was loaded and water was passed through the column at an applied pressure of 0.01-0.10 MPa, the majority of microalgae were captured within the upper domain of the gel bed, while only 20% were captured within the lower domain. The amount of Nannochloropsis sp. captured was expressed by an ordinary differential equation to determine the capture coefficient, K, and the maximum capture amount, Q_max. As pressure increased, gel gaps narrowed, K increased, and Q_max decreased because of a reduction in the number of effective capture sites upon compaction of the gel. When a mixed suspension of Anabaena sp., Monoraphidium sp., and Desmodesmus sp. (0.069 g L^-1 each) was injected into the gel bed at an applied pressure of 0.01 MPa, only Anabaena sp. was captured at the bottom of the gel bed. This device can be applied for the separation of microalgae in rivers and the sea.

Keywords: Compaction; Gel; Mathematical model; Microalgae; Separation.