Bone cutting plays an important role in spine surgical operations. The power devices with high speed employing in bone cutting usually leads to high cutting temperature of the bone tissue. This high temperature control is important in improving cutting surface quality and optimizing the cutting parameters. In this paper, the bone-cutting model was appropriately simplified for finite element (FE) based modeling of 2D orthogonal cutting to discuss the change law of cutting temperature of cortical bones for cervical vertebra, and to study the orthogonal cutting mechanism of the anisotropic cortical bone, a 3D FE simulation model had been also established in which longitudinal, vertical, and transversal cutting types were accomplished to investigate the effect of osteons orientation. Secondly, this response surface method was used to regress the simulation results, and establishes the prediction model of maximum temperature on cutting depth, cutting speed, and feed speed. Then, the Sobol method was used to analyze the sensitivity of the milling temperature prediction mathematical model parameters, in order to clarify and quantitatively analyze the influence of input milling parameters on the output milling temperature. Finally, the cutting temperatures obtained with the simulations were compared with the corresponding experimental results obtained from the bone milling tests. This study verifies the influence of key variables and the cutting parameters on thermo mechanical behavior of the bone cutting. The obtained cutting temperature distribution for the bone surfaces could be employed to establish a theoretical foundation for research on thermal damage control of bone tissues.
Keywords: Bone orthogonal cutting; FE modeling; cutting temperature; prediction model; sensitivity analysis.