Graphene has been considered as a material that may overcome the limitations of polymer semi-permeable membranes in water treatment technology. However, monolayer graphene still suffers from defects that cause leakage. Here, we report a method of sealing defects in graphene transferred onto porous polymer substrate via reduced graphene oxide (rGO). The influence of various reducing agents (e.g., vitamin C, hydrazine) on the properties of rGO was investigated by SEM, Raman, FTIR, and XRD. Subsequently, membranes based on graphene/reduced graphene oxide were tested in a forward osmosis system using sodium chloride (NaCl). The effect of the effectiveness of the reduction of graphene oxide, the type and number of attached groups, the change in the distance between the rGO flakes, and the structure of this material were examined in terms of filtration efficiency. As a result, semi-permeable centimetre-scale membranes with ion blocking efficiency of up to 90% and water flux of 20 mL h-1 m-2 bar-1 were proposed.
Keywords: desalination; forward osmosis; graphene; graphene membrane; graphene oxide.