Design-of-experiment analysis of non-destructive detachment of electric parts from printed circuit boards of mobile phones using a cross-flow shredder

Abstract

For minor metal recycling from electric parts, detachment without breakage (non-destructive detachment) of the electric parts from printed circuit boards (PCBs) is required. A cross-flow shredder (CFS), a drum-type chain mill, is often used in PCB recycling, but the effects of its individual features (e.g., chain thickness) on the non-destructive detachment of the PCB parts have yet to be understood. In this study, a CFS suited to the design-of-experiment (DoE) approach was developed; 27 different experimental conditions were evaluated, with three repetitions under each condition for a single PCB crushing, and the effect of nine CFS factors on the non-destructive detachment of parts from the PCBs of mobile phones was investigated. It was revealed that two factors (rotation rate and vent screen) have a statistically significant influence on such non-destructive detachment, and two other factors (chain-wall distance and crushing time) have a significant influence on related results such as the overcrushing of boards (PCBs after parts detachment) and powder generation. Based on these results, a future perspective on CFS improvement is presented.

Keywords: Cross-flow shredder; Design-of-experiment; Parts detachment; Printed circuit board.