Immobilization of molybdenum by alternative cementitious binders and synthetic C-S-H: An experimental and numerical study

Sci Total Environ. 2021 Oct 1:789:148069. doi: 10.1016/j.scitotenv.2021.148069. Epub 2021 May 27.

Abstract

Excavation operations during construction produce millions of tons of soil sometimes with high leachable molybdenum (Mo) contents, that can lead to risks for both human health and the environment. It is therefore necessary to immobilize the Mo in excavated soils to reduce pollution and lower the costs of soil disposal. This paper studies the immobilization of Mo by three cementitious binders. To this end, one Ordinary Portland cement (OPC), one binder composed of 90% ground granulated blast furnace slag (GGBS) and 10% OPC, and one supersulfated GGBS binder were spiked with sodium molybdate at six different Mo concentrations from 0.005 wt% to 10 wt% before curing. In addition, to gain mechanistic insights, the capacity of synthetic calcium silicate hydrates (C-S-H) to immobilize Mo was studied. This study was completed by thermodynamic modeling to predict the immobilization of Mo at low Mo concentrations (<0.005 wt%). Paste leaching tests results showed that more than 74% of the initial Mo spike was immobilized by the three binders. The supersulfated GGBS binder consistently showed the highest retention levels (92.0 to 99.7%). The precipitation of powellite (CaMoO4) was the dominant mechanism of Mo retention in all binders and most leaching solutions were oversaturated with respect to powellite. Also, in C-S-H syntheses, Mo was largely immobilized (>95%) by the coprecipitation of powellite. Thermodynamic modeling was in good agreement with measured values when the equilibrium constant of powellite was modified to LogK = -7.2. This suggested that powellite is less stable in cementitious environments than would be expected from thermodynamic databases. Moreover, modeling showed that, for a solution at equilibrium with portlandite or C-S-H, the Mo concentration is limited to 1.7 mg/L by powellite precipitation. In contrast, for a solution saturated with respect to ettringite, the threshold concentration for powellite precipitation is 6.5 mg/L.

Keywords: Contaminated soils; Ground granulated blast furnace slag; Leaching; Powellite; Stabilization mechanisms; Thermodynamic modeling.