Taking an aluminum alloy gearbox of an automobile as an example, according to its structural characteristics, the parting surface was determined, and the initial gating system was designed by using 3D modeling software UG. Based on Magmasoft software, the numerical simulation of the filling and solidification process was carried out to determine the best gating system scheme. The cooling system and core pulling structure were designed, and the parameter design process of the aluminum alloy gearbox shell in the die-casting process was introduced. Aiming at the leakage problem of the gearbox shell in the bench and road test after assembly, the cause was found through numerical simulation and industrial CT analysis, and the problem was solved by adding high-pressure point cooling at the corresponding position of the leakage, and the correctness of the optimization was verified. It provides an effective method for the die-casting production of the transmission housing and the analysis and solution of product defects, which improves the product quality and shortens the production cycle.
Keywords: aluminum alloy; gearbox housing; mold design; process optimization.