The first experience in the operation of intensified heat transfer adsorption bed reactor designed for low-pressure adsorption processes is presented in this paper. This work aims to assess the possibility of fluidizing the porous media bed induced by the pressure difference between the evaporator and the adsorption reactor. The conducted experimental research allowed indicating the type of silica gel recommended to use in fluidized beds of adsorption chiller. The fixed bed of silica gel was observed for the lower pressure differences, while fluidization appeared in the case of the pressure difference between the evaporator and the adsorption chamber higher than 1000 Pa. The most significant differences in the adsorption process between the fixed bed and the fluidized bed are revealed in the changes of sorbent temperatures. The silica gel bed was fluidized with water vapor generated in the evaporator.
Keywords: adsorption bed; fluidized bed; heat transfer; low-pressure sorption; porous media; silica gel.