This paper reports a numerical study of the sensitivity and applicability of the Nonlinear Coda Wave Interferometry (NCWI) method in a heterogeneous material with a localized microcracked zone. We model the influence of a strong pump wave on the localized microcracked zone as a small average increase in the length of each crack. Further probing of this microcracked zone with a multiply scattered ultrasonic wave induces small changes to the coda-type signal, which are quantified with coda wave interferometry. A parametric sensitivity study of the CWI observables with respect to the changes in crack length is established via numerical simulations of the problem using a 2D spectral element method (SEM2D). The stretching of the signal, proportional to the relative variation in effective velocity, is found to be linearly proportional to the global change in crack length, while the other CWI parameter, the remnant decorrelation coefficient, is found to be quadratically proportional to the crack length change. The NCWI method is shown to be relevant for the detection of different damaged material states in complex solids. The reported numerical results are especially significant in the context of quantitative nondestructive evaluation of micro-damage level of a heterogeneous materials using nonlinear ultrasound signals.
Keywords: Nonlinear Coda Wave Interferometry (NCWI); Nonlinear acoustics; Numerical modeling; Spectral Element Method (SEM).
Copyright © 2021. Published by Elsevier B.V.