Biochar derived from the pyrolysis of pine tannin is a green and available by-product of oil manufacturing that presents interesting features after having been activated by KOH at 650 °C. Different weight ratios of KOH to biochar were used and the resulting activated carbons (ACs) presented highly developed specific surface areas of up to 2190 m2 g-1, well-connected porosity and high oxygen content, leading to enhanced electrochemical performance when used as electrochemical capacitor electrodes in a 1 M H2SO4 aqueous electrolyte. Galvanostatic charge/discharge experiments evidenced that the best material achieved a maximum electrode capacitance of up to 232 F g-1 (at 0.5 A g-1) with a capacitance retention of 70% at 10 A g-1 using commercial mass loadings (i.e., approx. 10 mg cm-2). In addition, long cycling stability with a residual capacitance of 92 to 94% after 10,000 cycles at 5 A g-1 was achieved. These results prove that ACs derived from pine tannin biochars have great potential for their commercial use as electrochemical energy storage devices.
Keywords: Biochars; Electrochemical capacitors; KOH activation; Pyrolysis; Tannin.
Copyright © 2021 Elsevier Inc. All rights reserved.