Solar steam generation is an efficient way of harvesting solar energy for water purification. Developing a versatile solar absorber with salt resistance and the capability to purify an oil-in-water emulsion is a grand challenge. Herein, a polypropylene (PP) nonwoven fabric-based photothermal absorber is fabricated by the combination of carbon nanotubes (CNTs), polypyrrole (PPy), and a fluorinated hydrophobic coating in a layer-by-layer approach. The specially designed architecture displays a hierarchical microstructure and Janus wetting properties, facilitating solar absorption and heat generation on the evaporation surface, and can effectively prevent salt crystallization. The water layer formed on the superhydrophilic/underwater superoleophobic bottom surface could repel oil droplets and form a channel to advect concentrated salt back into bulk water, which enabled high purity separation of an oil-in-water emulsion and continuous desalinization of seawater without the reduction of the evaporation rate. As a result, the solar absorber can achieve a remarkable evaporation rate of 1.61 kg m-2 h-1 and an energy efficiency of 91.2% under 1 sun irradiation and shows extraordinary performance in the purification of contaminated wastewater (over 99.8% purity). The strategy proposed provides a pathway for developing versatile high-performance solar absorbers for the sustainable treatment of saline water, wastewater, and oil-containing water.
Keywords: composite nonwoven fabric; desalination; oil-in-water emulsion; salt resistance; solar steam generation.