In the present study, we synthesized hydroxyapatite (HAP) powders followed by the production of alginate based macroporous scaffolds with the aim to imitate the natural bone structure. HAP powders were synthesized by using a hydrothermal method, and after calcination, dominant phases in the powders, undoped and doped with Mg2+ were HAP and β-tricalcium phosphate, respectively. Upon mixing with Na-alginate, followed by gelation and freeze-dying, highly macroporous composite scaffolds were obtained with open and connected pores and uniformly dispersed mineral phase as determined by scanning electron microscopy. Mechanical properties of the scaffolds were influenced by the composition of calcium phosphate fillers being improved as Ca2+ concentration increased while Mg2+ concentration decreased. HAP formation within all scaffolds was investigated in simulated body fluid (SBF) during 28 days under static conditions while the best candidate (Mg substituted HAP filler, precursor solution with [Ca + Mg]/P molar ratio of 1.52) was investigated under more physiological conditions in a biomimetic perfusion bioreactor. The continuous SBF flow (superficial velocity of 400 μm/s) induced the formation of abundant HAP crystals throughout the scaffolds leading to improved mechanical properties to some extent as compared to the initial scaffolds. These findings indicated potentials of novel biomimetic scaffolds for use in bone tissue engineering.
Keywords: biomimetic perfusion bioreactor; bone tissue engineering; macroporous scaffolds; β-tricalcium phosphate.
© 2021 Wiley Periodicals LLC.