Technical Note: A 3D-printed phantom for radiochromic film evaluation of moving lung tumor SBRT without dose convolution

Abstract

Purpose: A common dosimetric quality assurance (QA) method in stereotactic body radiation therapy (SBRT) of lung tumors is to use lung phantoms with radiochromic film. However, in most phantoms, the film moves with the tumor, leading to the blurring effect. This technical note presents the QA performance of a novel phantom in which the film is fixed; this phantom can be used for both patient-specific QA and end-to-end testing.

Methods: Lung tumor motion was simulated with the CIRS Model 008A phantom. A lung-equivalent insert that consisted of a fixed radiochromic film around which a 2-cm tumor moved in the inferior/superior direction (i.e., mimicking respiration-induced tumor motion) was generated by 3D printing. Two common SBRT plans [dynamic conformal arc (DCA) and volumetric-modulated arc therapy (VMAT)] were calculated on the average intensity projection (AIP) image set in Varian Eclipse using the dose calculation algorithm Acuros XB. The plans were delivered by a Varian TrueBeam STx accelerator using 6-MV flattening filter-free energy. EBT3 films were used for treatment-dose verification. The measured and planned dose distributions were compared by using the local gamma index at 3% and 2 mm.

Results: Mean gamma pass rates of film and planned dose distributions were all ≥95%. DCA and VMAT plans did not differ in gamma pass rates. Planned and measured dose distributions agreed well, as did planned and measured gamma maps.

Conclusions: With this new insert, measured and planned dose distributions were very similar, which supports the current view in the field that dose calculations on AIP image sets account sufficiently for tumor motion during treatment. The phantom also performed well despite challenging breathing parameters (large tumor amplitude and slow breathing rate) and the application of a complex treatment technique (VMAT). This phantom could facilitate clinical and end-to-end film-based dosimetric QA for lung SBRT.

Taxonomy: Twenty-seven TH- Radiation dose measurement devices. Eleven Phantoms for dosimetric measurement.

Keywords: 3D-printed; film dosimetry; lung SBRT; tumor motion.