Cross-Linkable and Alcohol-Soluble Pyridine-Incorporated Polyfluorene Derivative as a Cathode Interface Layer for High-Efficiency and Stable Organic Solar Cells

Ping Cai; Xiaofang Huang; Tao Zhan; Guiting Chen; Rihang Qiu; Lianjie Zhang; Xiaogang Xue; Zhongmin Wang; Junwu Chen

doi:10.1021/acsami.1c00350

Cross-Linkable and Alcohol-Soluble Pyridine-Incorporated Polyfluorene Derivative as a Cathode Interface Layer for High-Efficiency and Stable Organic Solar Cells

ACS Appl Mater Interfaces. 2021 Mar 17;13(10):12296-12304. doi: 10.1021/acsami.1c00350. Epub 2021 Mar 8.

Authors

Ping Cai¹, Xiaofang Huang¹, Tao Zhan¹, Guiting Chen², Rihang Qiu³, Lianjie Zhang³, Xiaogang Xue¹, Zhongmin Wang¹, Junwu Chen³

Affiliations

¹ School of Materials Science and Engineering & Guangxi Key Laboratory of Information Materials, Guilin University of Electronic Technology, Guilin 541004, P. R. China.
² School of Chemistry and Environment, Jiaying University, Meizhou 514015, P. R. China.
³ Institute of Polymer Optoelectronic Materials & Devices, State Key Laboratory of Luminescent Materials & Devices, South China University of Technology, Guangzhou 510640, P. R. China.

PMID: 33682400
DOI: 10.1021/acsami.1c00350

Abstract

Device performance and commercialization of organic solar cells (OSCs) are strongly influenced by the characteristics of the interface layers. Cross-linked polymer interface layers with solvent-resistant properties are very compatible with large-area solution-processing methods of OSCs and may be beneficial to the environmental stability of OSCs due to the viscoelastic and cross-linked characteristics of the cross-linked polymer. In this work, a novel cross-linkable and alcohol-soluble pyridine-incorporated polyfluorene derivative, denoted as PFOPy, is synthesized and used as a cathode interface layer (CIL) in OSCs. For PFOPy, the pendant epoxy group can be effectively cross linked through cationic polymerization under thermal treatment and the pendant pyridine group can offer good alcohol solubility. Optical absorption tests of PFOPy films before/after washing by chloroform demonstrate the excellent solvent-resistance property for the cross-linked PFOPy film. Compared with the typical ZnO CIL, the cross-linked PFOPy CIL can also substantially reduce ITO's work function and form a better interface contact with the active layer. Utilizing an inverted device structure and a typical active layer of PM6:Y6, ZnO-based OSCs display an optimal power conversion efficiency (PCE) of 15.83% while PFOPy-based OSCs exhibit superior photovoltaic performance with an optimal PCE of 16.20%. Moreover, ZnO-based and PFOPy-based OSCs separately maintain 89% and 90% of the corresponding initial PCE after 12 h of illumination, indicating similarly excellent photostability. More importantly, after 26 complete thermal cycles, ZnO-based OSCs only maintain 81% of the initial PCE while PFOPy-based OSCs retain 92% of the initial PCE and exhibit obviously better thermal cycling stability, indicating that the cross-linked PFOPy CIL should offer stronger interface robustness against thermal cycling stress due to the viscoelastic and cross-linked characteristics of PFOPy. The impressive results indicate that the cross-linked PFOPy CIL would be a very promising CIL in OSCs.

Keywords: cathode interface layer; cross-linkable polymer; environmental stability; organic solar cells; photovoltaic efficiency.