Physical characterization of 3 implant systems made of distinct materials with distinct surfaces

Abstract

Statement of problem: Dental implants undergo various surface treatments. Studies that have characterized their surface and subsurface by using the same methods are scarce.

Purpose: The purpose of this study is to physically characterize the surface and subsurface of implant systems made of commercially pure (cp) titanium (Ti) grade (gr) 4 and Ti alloy gr 23 and to evaluate whether airborne-particle abrasion and acid etching is an appropriate surface treatment for Ti alloy gr 23.

Material and methods: Implant groups (n=3) were as follows: TG4AO, cp Ti gr 4, treated with anodic oxidation (3.5×8 mm) (NobelReplace Conical; Nobel Biocare); TG23AE, Ti gr 23 (TiAlV ELI) airborne-particle abraded-and-etched (3.9×8 mm) (V3; MIS); and TG4AE, cp Ti gr 4, airborne-particle abraded and etched (3.3×8 mm) (BL; Institut Straumann AG). Surface roughness, surface topography, and elemental and surface composition were investigated with optical profilometry, scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The presence and size of Ti hydride (TiH) needles were determined on metallographic sections. Depth profiling was obtained by time-of-flight secondary ion mass spectrometry (ToF-SIMS) to determine possible enrichment of an alloying element at the implant surface.

Results: The mean arithmetic deviation roughness (S_a), of TG4AO was 0.80 μm. The S_a of TG4AO was 1.22 μm, and the S_a of TG4AO was 1.59 μm. The difference between the groups was significant (P<.001). TG23AE and TG4AE displayed a macrotexture and microtexture with pores; TG4AO showed a 3-to 12-μm canyon-like structure. The surface and subsurface compositions were as follows: for TG4AO, αTi and phosphorus-rich anatase; for TG23AE, α-Ti matrix with β-Ti grains; and for TG4AE, α-Ti and δ-TiH_2-x. TiH needles were found only on TG4AE; the Ti oxide layer of TG4AO was rough, 3-to 16-μm thick, and porous. The time-of-flight secondary ion mass spectrometry (ToF SIMS) concentration profile of TG23AE did not show enrichment of any alloying element.

Conclusions: The roughness, topography, and composition of the surfaces were different for all implants tested. Airborne-particle abrasion and subsequent etching was an appropriate treatment for Ti gr 23 alloy implants.