Improvement of wastewater sludge dewatering using ferric chloride, aluminum sulfate, and calcium oxide (experimental investigation and descriptive statistical analysis)

Water Environ Res. 2021 Jul;93(7):1138-1149. doi: 10.1002/wer.1526. Epub 2021 Apr 17.

Abstract

In this research, application of chemical conditioners for the conditioning of sludge and their effects on the improvement of sludge thickening of the wastewater treatment plant in the city of Bojnourd (Iran) is investigated. The concentration of chemical conditioners, pH and coagulation and flocculation time is from among the parameters studied in this research work. The results obtained indicate that sludge volume reduction for the chemical conditioners used, including Ferric Chloride (FeCl3 ), Aluminum Sulfate (Al2 (SO4 )3 ), and Calcium Oxide (CaO) are 41, 17, and 33 percent, respectively. The optimal concentration for FeCl3 , Al2 (SO4 )3, and CaO are 550, 1100, and 292 mg/L, respectively, and the optimal values of pH are 9, 7.5, and 10, respectively. The time to filtration (TTF) and reduction in sludge moisture content (SMC) for Ferric Chloride, Aluminum Sulfate, and Calcium Oxide are 45 s and 6.2%, 135 s and 3.3%, 190 s and 2.4% respectively. PRACTITIONER POINTS: Investigating the sludge conditioning by Ferric Chloride, Aluminum Sulfate, and Calcium Oxide. Determining the optimal concentration, pH, and coagulation/flocculation time. Calculating the time to filtration (TTF) and reduction in sludge moisture content (SMC). Predicting the settled sludge volume using descriptive statistical analysis.

Keywords: chemical; conditioning; descriptive analysis; dewatering; sludge.

MeSH terms

  • Alum Compounds
  • Calcium Compounds
  • Chlorides
  • Ferric Compounds
  • Filtration
  • Flocculation
  • Iran
  • Oxides
  • Sewage*
  • Waste Disposal, Fluid
  • Wastewater*

Substances

  • Alum Compounds
  • Calcium Compounds
  • Chlorides
  • Ferric Compounds
  • Oxides
  • Sewage
  • Waste Water
  • aluminum sulfate
  • lime
  • ferric chloride