Effect of in vitro aging and acidic storage on color, translucency, and contrast ratio of monolithic zirconia and lithium disilicate ceramics

J Prosthet Dent. 2022 Mar;127(3):479-488. doi: 10.1016/j.prosdent.2020.12.015. Epub 2021 Jan 24.

Abstract

Statement of problem: How the translucency and color of ceramic restorations are affected by surface changes from the corrosive environment in the oral cavity and aging of materials is unclear.

Purpose: The purpose of this in vitro study was to compare the impact of acidic exposure and aging on the color and translucency of monolithic zirconia and lithium disilicate ceramics.

Material and methods: Twenty computer-aided design and computer-aided manufacturing (CAD-CAM) monolithic zirconia specimens and 20 pressed lithium disilicate specimens were fabricated. Half of the specimens of each group were aged in an autoclave (7.5 hours, 134 °C, 0.2 MPa), and the rest were immersed in hydrochloric acid to simulate the acidic conditions in the oral cavity from gastric reflux. The color coordinates L∗, a∗, and b∗ were measured with an ultraviolet spectrophotometer before and after aging or acidic storage. The translucency parameters and contrast ratios were calculated, and the CIEDE2000 color difference formula was used to determine color differences before and after each treatment. ANOVA and ANCOVA test models were used for data analysis (α=.05), while differences of color parameters in respect to acceptability and perceptibility thresholds were evaluated with the 1-sample t test (α=.05).

Results: Lithium disilicate presented a significantly higher translucency parameter and lower contrast ratio at baseline compared with monolithic zirconia specimens (P<.001). Acidic storage significantly impacted all parameters compared with aging, especially for the lithium disilicate group. Color differences were above the acceptability ΔΕ00 threshold for lithium disilicate after acidic storage (P=.001) and below for monolithic zirconia after acidic storage (P=.003).

Conclusions: The performance of lithium disilicate was slightly inferior compared with that of monolithic zirconia specimens, as they presented significant and clinically observable differences for the translucency parameter and ΔΕ00 after acidic storage and aging.

MeSH terms

  • Ceramics
  • Color
  • Computer-Aided Design
  • Dental Porcelain*
  • Materials Testing
  • Surface Properties
  • Zirconium*

Substances

  • lithia disilicate
  • Dental Porcelain
  • Zirconium
  • zirconium oxide