The Allium micronucleus (MNC) assay was developed to monitor low levels of mercury in aquatic and terrestrial environments. Four mercurial derivatives namely mercuric chloride (MC), methyl mercuric chloride (MMC), phenyl mercuric acetate (PMA) and a methoxy ethyl mercuric chloride based fungicide, Emisan-6, were tested to assess the sensitivity and versatility of the Allium MNC assay. Allium bulbs were set directly on water and soil contaminated with known levels of mercurial derivatives (0.0001-10.00 ppm). On the 5th day the endpoints measured were root length, mitoses with spindle abnormality and cells with MNC in root meristems. The effective concentrations of the test chemicals that cause 50% of root length as compared to control (EC50) were determined from dose-response curves so obtained. The lowest effective concentration tested (LECT) and highest ineffective concentration tested (HICT) for each of the mercurial derivatives for the induction of spindle malfunction and MNC were determined. It was found that EC50, LECT and HICT values for mercurial derivatives in soil were higher than those in water. The frequencies of cells with MNC and mitoses with spindle abnormality were highly correlated indicating that MNC is a good parameter of spindle malfunction. The present approach increased the sensitivity of the Allium assay by 10-fold, the detection limit being 0.001-0.1 ppm and 0.1-1.0 ppm in aquatic and terrestrial environments respectively, depending on the species of mercury.