Robust cellulose-based composite adsorption membrane for heavy metal removal

Abstract

Adsorptive membranes offer an effective mode to remove heavy metal ions from contaminated water, due to the synergies made possible by low-cost, high-affinity adsorbents and highly scalable filtration in one system. However, the development of adsorptive membranes is hampered by their instability in the aqueous phase and low binding affinity with a broad spectrum of heavy metals in a reasonable flux. Herein, a regenerated cellulose support membrane is strongly grafted with stable and covalent-bonded polyelectrolyte active layers synthesized by a reactive layer-by-layer (LBL) assembly method. The LBL assembled layers have been successfully tested by scanning electron microscopy, Fourier-transform infrared spectroscopy and X-ray photo-electron spectroscopy. The covalent bonding provides the membrane with long-term stability and a tunable water flux compared to a membrane assembled by electrostatic bonding. The maximum adsorption capacity of the membrane active layers can reach up to 194 mg/g, showing more efficient adsorption at lower heavy metal concentration and higher pH value of feed solution. The membrane can remove multiple ions, such as Cu, Pb, and Cd, by adsorption and is easy to be regenerated and recovered. The strong covalent bonding can extend the membrane lifetime in water purification to remove multiple heavy metals at high efficiency.

Keywords: Layer-by-layer (LBL) covalent interaction; Poly(maleic anhydride-co-acrylic acid) P(MA-co-AA); Polyethylenimine (PEI); Regenerated cellulose (RC) membrane; Water treatment.