Raw clay is used nowadays in construction as a component of mortars and plasters and as a binder in composites based on straw or shives. It is a material with good sorption properties and vapor permeability, but it is susceptible to shrinkage, is not resistant to water, and also is characterized by low mechanical strength, which makes it impossible to be used, for example, in external plasters. Various additives and admixtures are used to improve selected properties of clay mortars. The article presents the research results and assessment of the effect of glauconite clay mortar modification with an admixture of linseed oil varnish on selected properties. Admixtures in the amounts of 1%, 2%, and 3% in relation to clay weight were used. Flexural and compressive strength, water resistance, shrinkage, drying capacity, density, and porosity of mortar, were tested. The admixture of linseed oil varnish in the amounts used in the investigation had a positive effect on some of the tested properties; regardless of the quantity of the admixture, the modified mortars had better parameters concerning flexural strength, shrinkage reduction, and water resistance than the reference mortar, without admixture.
Keywords: clay mortar; glauconite; linseed oil varnish; mechanical properties; water resistance.