Poly(dimethylsiloxane) (PDMS) elastomer is now a well-known material for packaging implantable biomedical micro-devices owing to unique bulk properties such as biocompatibility, low toxicity, excellent rheological properties, good flexibility, and mechanical stability. Despite the desirable bulk characteristics, PDMS is generally regarded as a high-flux material for oxygen and water vapor to penetrate compared with other polymeric barrier materials, which is related to the defect-induced penetration through the packaging coating prepared by the traditional deposition techniques. Besides, its hydrophobic nature causes serious fouling problems and limits the practical application of PDMS-based devices. In this work, the performance of silicone thin films as a packaging layer was improved by the fabrication of the roller-casted multiple thin layers to minimize a defect-induced failure. To confer hydrophilicity and cell fouling resistance, high-density and well-defined poly(oligo(ethylene glycol) methacrylate) (POEGMA) brushes were tethered via the surface-initiated atom transfer radical polymerization (SI-ATRP) technique on the roller-casted multiple thin PDMS layers. The characteristics of fabricated substrates were determined by static water contact angle measurement, X-ray photoelectron spectroscopy, and attenuated total reflection-Fourier transform infrared spectroscopy. In vitro cell behavior of POEGMA-grafted PDMS substrates was evaluated to examine cell-fouling resistance.
Keywords: Permeability; Poly(dimethylsiloxane); cell fouling resistance; mechanical properties; poly(oligo(ethylene glycol) methacrylate); surface-initiated atom transfer radical polymerization.