Remediation of soils contaminated with hydrocarbon materials is of particular importance due to their association with food chain. One of the remediation methods, which has been taken into account in recent years by researchers, is the electrokinetic technique. In this study, the electrokinetic method was used in combination with the Fenton technique to remove phenanthrene from clay soil. Oxidizing agent and catalyst used in the Fenton technique greatly influenced the efficiency of the remediation process. To investigate the effect of these two factors on the remediation process, it was made use of three different types of electrodes as catalyst, including graphite, iron, and copper, as well as hydrogen peroxide and sodium persulfate with different concentrations as oxidizing agent. During the 9 experiments designed, factors affecting removal efficiency, such as remediation time, electric current intensity, electroosmotic flow rate, and pH of the cathode and anode reservoirs were also investigated. Overall, the use of the electrokinetic-Fenton method with 15% hydrogen peroxide and copper electrode exhibited a 100% increase in the process efficiency over the same time period required to perform the conventional electrokinetic method and removed 93% of the soil phenanthrene, these findings indicated that combining the Fenton technique with the electrokinetic method enhanced the efficiency of this method in removing organic pollutants from the soil. Also, the use of sodium persulfate as an oxidizing agent in the electrokinetic method increased the removal efficiency by more than 95% over the half time period required to perform the conventional electrokinetic method.
Keywords: Electrokinetic; Fenton; Phenanthrene; Sodium persulfate; Soil.
Copyright © 2020 Elsevier Ltd. All rights reserved.