Revealing the substitution preference of zinc in ordinary Portland cement clinker phases: A study from experiments and DFT calculations

Jianping Zhu; Kuo Yang; Yang Chen; Guangxin Fan; Li Zhang; Benkai Guo; Xuemao Guan; Ruiqi Zhao

doi:10.1016/j.jhazmat.2020.124504

Revealing the substitution preference of zinc in ordinary Portland cement clinker phases: A study from experiments and DFT calculations

J Hazard Mater. 2021 May 5:409:124504. doi: 10.1016/j.jhazmat.2020.124504. Epub 2020 Nov 9.

Authors

Jianping Zhu¹, Kuo Yang¹, Yang Chen¹, Guangxin Fan¹, Li Zhang¹, Benkai Guo¹, Xuemao Guan¹, Ruiqi Zhao²

Affiliations

¹ Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China.
² Henan Key Laboratory of Materials on Deep-Earth Engineering, School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454003, China. Electronic address: zhaoruiqi@hpu.edu.cn.

PMID: 33229261
DOI: 10.1016/j.jhazmat.2020.124504

Abstract

Ordinary Portland cement (OPC) clinker mainly consist four minerals, tricalcium silicate (C₃S), dicalcium silicate (C₂S,), tricalcium aluminate (C₃A), and tetracalcium aluminoferrite (C₄AF). To learn the doping behaviors of Zn in OPC clinker, a series of samples were prepared by calcinating the mixtures of CaCO₃, SiO₂, Al₂O₃, Fe₂O₃, and ZnO. Our results from energy-dispersive spectroscopy, X-ray diffraction and density functional theoretical simulations show that a small amount of ZnO enter C₃S and C₂S by replacing Ca ions while most incorporate into C₄AF by substituting Fe atoms, resulting in a decrease of C₃A in OPC as dosage increases. Further analyses from partial density of states and distributions of bond order-bond length indicate that the doping preference can be ascribed to the similar electron contributions and small structure distortions between host and guest ions. Unlike the strong Fe‒O bond, the newly formed Zn‒O is much weaker. The weak Zn‒O may be responsible for the limited solubility of Zn in C₄AF. These results provide a possibility of increasing solubility of Zn in OPC clinker by increasing the contents of C₃A and C₄AF, thus will be very meaningful in the synthesis of OPC clinker by utilizing Zn-bearing alternative raw materials.

Keywords: DFT calculation; Electronic structures; Ordinary Portland cement; Zinc substitution.