Since COVID-19 pandemic, indoor air quality control has become a priority, and the development of air purification devices effective for disinfecting airborne viruses and bacteria is of outmost relevance. In this work, a photocatalytic device for the removal of airborne microorganisms is presented. It is an annular reactor filled with TiO2-coated glass rings and irradiated internally and externally by UV-A lamps. B. subtilis spores and vegetative cells have been employed as model biological pollutants. Three types of assays with aerosolized bacterial suspensions were performed to evaluate distinct purification processes: filtration, photocatalytic inactivation in the air phase, and photocatalytic inactivation over the TiO2-coated rings. The radiation distribution inside the reactor was analysed by performing Monte Carlo simulations of photon absorption in the photocatalytic bed. Complete removal of a high load of microorganisms in the air stream could be achieved in 1 h. Nevertheless, inactivation of retained bacteria in the reactor bed required longer irradiation periods: after 8 h under internal and external irradiation, the initial concentration of retained spores and vegetative cells was reduced by 68% and 99%, respectively. Efficiency parameters were also calculated to evaluate the influence of the irradiation conditions on the photocatalytic inactivation of bacteria attached at the coated rings.
Keywords: Air purification device; Bioaerosols; Efficiency parameters; Packed bed; Photocatalysis; Radiation absorption.