Sixteen full-scale recycled aggregate concrete (RAC) beams were cast and tested to study their time-dependent behavior under long-term loading. The test parameters include the replacement rate of the recycled coarse aggregates (RCAs), the replacement rate of the recycled fine aggregates (RFAs), the concrete strength, and the stress ratio. The influence of the above variables on the deflection and stiffness is discussed. The results show that the RCAs will increase the deflection of the specimen at a low stress ratio; at a high stress ratio, the beams will experience nonlinear creep, and the deflection of the specimen will be affected by the RCAs and the stress ratio. The RFAs have a substantial influence on the time-dependent behavior of the specimen, and the deflection of the specimen with 100% replacement of recycled aggregates can increase by 30%; the strength of the concrete does not have a substantial influence on the time-dependent behavior of the specimen; and the stress ratio has an influence on the initial deflection of the specimen. A deflection calculation formula is established based on the stress-strain relationship of the beam under long-term loading and the characteristics of the RAC. The calculation results are in good agreement with the test results.
Keywords: full-scale beam; long-term loading; recycled aggregate concrete; time-dependent behavior.