Irrigation water contaminated with arsenic acts as a potent source of contamination to humans through water-soil-crop-food transfer so quantification of safe limit for irrigation water is also critical. A pot experiment was conducted to determine the safe limit for As contaminated irrigation water with two soil types (alluvial and red) using ten levels of contaminated irrigation water (0, 0.25, 0.5, 0.75, 1.0, 1.25, 1.50, 1.75, 2.0, 2.25 mg L-1), applied 5 times in rice (Variety: Sushak Samrat),used as a test crop. The results reveal that the different fractions of arsenic in terms of its profusion followed the order F4 > F2 > F5 > F3 > F1 and F4 > F3 > F2 > F5 > F1 across all the doses of As for alluvial soil and red soil respectively. The safe limit of irrigation water in terms of risk assessment expressed as Hazard Quotient (HQ) was at 0.75 mg L-1 and the solubility FIAM can effectively predict the As content in rice grain in both the soils. The Tobit Regression Model in alluvial soil quantified the safe limit for As in irrigation water from 1.20 to 0.10 mg L-1 for available soil As 0.25-3.0 mg kg-1 and in red soil, the range was from 0.10 to 0.40 mg L-1 for soil As 1.0 to 0.25 mg kg-1 provided that the As content in rice grain is < 0.4 mg kg-1. This proved to be an effective protocol for estimation of safe limits after proper validation and calibration.
Keywords: Arsenic; FIAM; Irrigation water; Rice; Safe limit; Tobit regression model.
Copyright © 2020 Elsevier Ltd. All rights reserved.