Waste Printed circuit boards (PCBs) are one of the most valuable and recycled components of electronic waste due to the presence of precious metals such as copper, silver, gold and palladium. The rejects of the PCB recycling process, named non-metal fraction (NMF) have continuously been sent to landfills. Several researchers have proposed alternative use of NMF as secondary materials such as fillers in composites or as adsorbent. This study is focused on the potential application of the PCB recycling rejects as waste-derived fuel or alternative fuel in the cement industry. Approximately 2 million metric tonnes (Mt) of this waste was produced in 2014 globally and estimated to reach 6.5 million Mt in 2050. The presence of high organic matter in the NMF renders it useful as an alternative fuel. The organic content of the NMF could also potentially be increased using gravity separation and thus increasing its net calorific value. The study showed that the NMF could provide up to 21 MJ kg-1 of heating value with low heavy metal and ash concentration. A comparison with other waste-derived fuel sources is also presented in the paper.
Keywords: Printed circuit boards; alternative fuel; calorific value; cement industry; non-metal fraction; waste-derived fuel.