The ecological transition is a process the building industry is bound to undertake. This study aimed to develop new bio-based building partition typologies and to determine if they are suitable ecological alternatives to the conventional non-renewable ones used today. This work started with the development of a bio-based epoxy composite board and a waste-based sheep wool acoustic absorbent. Six different partition typologies combining conventional and bio-based materials were analyzed. A drywall partition composed of gypsum plasterboard and mineral wool was used as the baseline. First, a cradle-to-gate life cycle assessment was performed to compare their environmental impacts. Secondly, a mathematical simulation was performed to evaluate their airborne acoustic insulation. The LCA results show a 50% decrease in the amount of CO2 equivalent emitted when replacing plasterboard with bio-composite boards. The bio-composites lower the overall environmental impact by 40%. In the case of the acoustic absorbents, replacing the mineral wool with cellulose or sheep wool decreases the carbon emissions and the overall environmental impact of the partition from 4% and 6%, respectively. However, while the bio-based acoustic absorbents used offer good acoustic results, the bio-composites have a lower airborne acoustic insulation than conventional gypsum plasterboard.
Keywords: bio-epoxy composites; building acoustics; life cycle assessment; sustainable building materials.