Boosting Solar Hydrogen Production of Molybdenum Tungsten Sulfide-Modified Si Micropyramids by Introducing Phosphate

Karthika Pichaimuthu; Chih-Jung Chen; Chia-Hsien Chen; Yung-Tao Chen; Chaochin Su; Da-Hua Wei; Ru-Shi Liu

doi:10.1021/acsami.0c11538

Boosting Solar Hydrogen Production of Molybdenum Tungsten Sulfide-Modified Si Micropyramids by Introducing Phosphate

ACS Appl Mater Interfaces. 2020 Sep 16;12(37):41515-41526. doi: 10.1021/acsami.0c11538. Epub 2020 Aug 31.

Authors

Karthika Pichaimuthu^{1

2}, Chih-Jung Chen¹, Chia-Hsien Chen³, Yung-Tao Chen¹, Chaochin Su², Da-Hua Wei³, Ru-Shi Liu¹

Affiliations

¹ Department of Chemistry, National Taiwan University, Taipei 10617, Taiwan.
² Institute of Organic and Polymeric Materials, Research and Development Center for Smart Textile Technology, National Taipei University of Technology, Taipei 10608, Taiwan.
³ Department of Mechanical Engineering and Graduate Institute of Manufacturing Technology, National Taipei University of Technology, Taipei 10608, Taiwan.

PMID: 32799525
DOI: 10.1021/acsami.0c11538

Abstract

Si is regarded as a promising photocathode material for solar hydrogen evolution reaction (HER) because of its small band gap and highly negative conduction band edge. However, bare Si electrodes have high overpotential because of sluggish HER kinetics on the surface. In this study, molybdenum tungsten sulfide (MoS₂-WS₂) was decorated on Si photocathodes as the co-catalyst to accelerate HER kinetics. The catalytic performance of MoS₂-WS₂ was further enhanced by introducing phosphate materials. Phosphate-modified molybdenum tungsten sulfide (PO-MoWS) was deposited on Si photoabsorbers to provide an optimal current of -15.0 mA cm^-2 at 0 V. Joint characterizations of X-ray photoelectron and X-ray absorption spectroscopies demonstrated that the phosphate material dominantly coordinated with the WS₂ component in PO-MoWS. Moreover, this phosphate material induced a large number of sulfur vacancies in the PO-MoWS/Si electrodes that contributed to the ideal catalytic activity. Herein, TiO₂ thin films were prepared as the protective layer to improve the stability of photocathodes. The PO-MoWS/2 nm TiO₂/Si electrode maintained 83.8% of the initial photocurrent after chronoamperometric measurement was performed for 8000 s.

Keywords: molybdenum disulfide; phosphate; photoelectrochemical hydrogen production; silicon micropyramids; tungsten disulfide.