Additive manufacturing (AM) of ceramics, particularly of zirconia, is becoming of increasing interest due to the substantial freedom available in the design and fabrication process. However, due to the novelty of the field and the challenges associated with printing dense bulk ceramics suitable for structural applications, thorough investigations that explore the effects of printing on the mechanical performance are limited. Previous work has identified anisotropy in the mechanical properties and attributed it to the layer-by-layer deposition. However, substantiated fractographic evidence detailing the origins and effects of layer lines on the probability of failure are limited. This study investigates the mechanical properties of a dense (>99 %TD), partially stabilized zirconia fabricated by a digital light projection printing method following ASTM standards. Hardness and strength evaluations were conducted, followed by a Weibull analysis and fractography. The investigation entailed five unique build directions and a conventionally manufactured reference material that was used as a control. Although the strengths were comparable to the reference material for some orientations, fracture frequently initiated at layer lines and related defects in all orientations. The findings indicate that if the layer lines can be prevented or engineered, the strength of vat printed ceramics can be improved substantially.
Keywords: Additive manufacturing; defect analysis; dental ceramics; digital light projection; zirconia.