Kinetics of thermal degradation and lifetime study of poly(vinylidene fluoride) (PVDF) subjected to bioethanol fuel accelerated aging

Agmar José de Jesus Silva; Maria Marjorie Contreras; Christine Rabello Nascimento; Marysilvia Ferreira da Costa

doi:10.1016/j.heliyon.2020.e04573

Kinetics of thermal degradation and lifetime study of poly(vinylidene fluoride) (PVDF) subjected to bioethanol fuel accelerated aging

Heliyon. 2020 Jul 31;6(7):e04573. doi: 10.1016/j.heliyon.2020.e04573. eCollection 2020 Jul.

Authors

Agmar José de Jesus Silva¹, Maria Marjorie Contreras¹, Christine Rabello Nascimento¹, Marysilvia Ferreira da Costa¹

Affiliation

¹ Programa de Engenharia Metalúrgica e de Materiais - PEMM/COPPE/UFRJ, Universidade Federal do Rio de Janeiro, Rio de Janeiro 68525, Brazil.

Abstract

PVDF was prepared by compression molding, and its phase content/structure was assessed by WAXD, DSC, and FTIR-ATR spectroscopy. Next, PVDF samples were aged in bioethanol fuel at 60 °C or annealed in the same temperature by 30 ─ 180 days. Then, the influence of aging/annealing on thermal stability, thermal degradation kinetics, and lifetime of the PVDF was investigated by thermogravimetric analysis (TGA/DTG), as well as the structure was again examined. The crystallinity of ~41% (from WAXD) or ~49% (from DSC) were identified for unaged PVDF, without significant changes after aging or annealing. This PVDF presented not only one phase, but a mixture of α-, β- and γ-phases, α- and β-phases with more highlighted vibrational bands. Thermal degradation kinetics was evaluated using the non-isothermal Ozawa-Flynn-Wall method. The activation energy (E _a ) of thermal degradation was calculated for conversion levels of α = 5 ─ 50% at constant heating rates (5, 10, 20, and 40 °C min^─1), α = 10% was fixed for lifetime estimation. The results indicated that temperature alone does not affect the material, but its combination with bioethanol reduced the onset temperature and E _a of primary thermal degradation. Additionally, the material lifetime decreased until about five decades (T _f = 25 °C and 90 days of exposition) due to the fluid effect after aging.

Keywords: Activation energy; Aging; Bioethanol fuel; Kinetics analysis; Lifetime prediction; Materials chemistry; Materials science; Poly(vinylidene fluoride).