SnO2 Nanoflower-Nanocrystalline Cellulose Composites as Anode Materials for Lithium-Ion Batteries

Quang Nhat Tran; Il Tae Kim; Sangkwon Park; Hyung Wook Choi; Sang Joon Park

doi:10.3390/ma13143165

SnO₂ Nanoflower-Nanocrystalline Cellulose Composites as Anode Materials for Lithium-Ion Batteries

Materials (Basel). 2020 Jul 15;13(14):3165. doi: 10.3390/ma13143165.

Authors

Quang Nhat Tran¹, Il Tae Kim¹, Sangkwon Park², Hyung Wook Choi³, Sang Joon Park¹

Affiliations

¹ Department of Chemical and Biological Engineering, Gachon University, Seongnam 13120, Korea.
² Department of Chemical and Biochemical Engineering, Dongguk University, Jung-gu, Seoul 04620, Korea.
³ Department of Electrical Engineering, Gachon University, Seongnam 13120, Korea.

Abstract

One of the biggest challenges in the commercialization of tin dioxide (SnO₂₎-based lithium-ion battery (LIB) electrodes is the volume expansion of SnO₂ during the charge-discharge process. Additionally, the aggregation of SnO₂ also deteriorates the performance of anode materials. In this study, we prepared SnO₂ nanoflowers (NFs) using nanocrystalline cellulose (CNC) to improve the surface area, prevent the particle aggregation, and alleviate the change in volume of LIB anodes. Moreover, CNC served not only as the template for the synthesis of the SnO₂ NFs but also as a conductive material, after annealing the SnO₂ NFs at 800 °C to improve their electrochemical performance. The obtained CNC-SnO₂NF composite was used as an active LIB electrode material and exhibited good cycling performance and a high initial reversible capacity of 891 mA h g^-1, at a current density of 100 mA g^-1. The composite anode could retain 30% of its initial capacity after 500 charge-discharge cycles.

Keywords: CNC; SnO2; carbon-based conductive materials; lithium-ion batteries; nanocrystalline cellulose; tin dioxide nanoflower.

Grants and funding

R18XA02/Korea Electric Power Corporation