Temperature prediction of ultrasonic vibration-assisted milling

Abstract

Machining temperature is a key factor in ultrasonic vibration-assisted milling as it can significantly influence tool wear rate and residual thermal stresses. In current study, a physics-based analytical predictive model on machining temperature in ultrasonic vibration-assisted milling is proposed, without resorting to iterative numerical simulations. As the tool periodically loses contact with the workpiece under vibration, three types of tool-workpiece separation criteria are first examined based on the tool trajectory under ultrasonic vibration. Type I criterion examines whether the relative velocity between tool and workpiece in cutting direction is opposite to the tool rotation direction. Type II criterion examines whether the instantaneous vibration displacement in radial direction is larger than instantaneous uncut chip thickness. Type III criterion examines whether there is overlap between current and previous tool paths due to vibration. If no contact, the instantaneous temperature rise is zero. Otherwise, the temperature rise is predicted under shearing heat source in shear zone and secondary rubbing heat source along machined surface. A mirror heat source method is applied to predict temperature rise, considering oblique band heat sources moving in a semi-infinite medium. The proposed predictive temperature model in ultrasonic vibration-assisted milling is validated through comparison to experimental measurements on Al 6063 alloy. The proposed predictive model is able to match the measured temperature with high accuracy of 1.85% average error and 5.22% largest error among all cases. Sensitivity analysis is also conducted to study the influences of cutting and vibration parameters on temperature. The proposed model is valuable in terms of providing an accurate and reliable reference for the prediction of temperature in ultrasonic vibration-assisted milling.

Keywords: Milling; Modeling; Temperature; Ultrasonic vibration.