The emergence and spread of antibiotic-resistant bacteria is a global threat to human health. An accurate antibiotic susceptibility test (AST) before initiating the treatment is paramount in the treatment and bacterial resistance control. However, the current AST methods either are complex, use chemical and biological labels, lack multiplexing, are expensive, or are too slow to be used for routine screening. The primary objective of the current study is to develop an automated electrochemical microfluidic chip (EMC) for simple and rapid AST. The microfluidic channels and gold microelectrodes were designed for the automation of antibiotic mixing and distribution in multiple test chambers and for electrical signal measurements. The designed chip was tested for AST with E. coli samples, and the results were compared with conventional broth microdilution. The presented EMC provided rapid bacterial count and AST in 170 and 150 min, respectively, while the conventional broth microdilution evaluates in 450 and 240 min, respectively. The rapid AST capability of the EMC was further demonstrated with the artificial urine samples, and the results were obtained in 270 min, which was 90 min faster than the broth microdilution method. Additionally, the minimum inhibitory concentration (MIC) was evaluated on the EMC and compared with the results from an AlamarBlue assay. The experimental results indicate the sensitivity of the chip, minimum loss of antibiotics, and eventually, reduction in the evolution of antibiotic resistance. Cumulatively, we have developed an automated, label-free, economical, rapid, robust, and user-friendly EMC for the evaluation of AST in urine samples.
Keywords: AST; E. coli; UTIs; label-free; microfluid chip.